Turbo Shear Drill

Browse For Turbo Shear Drill at Shoplionly | Price Comparison For Turbo Shear Drill: newest deals, sales, ratings, and shopping information

Turbo Shear Drill - TOP Deals

Browse Turbo Shear Drill shopping results from Amazon & compare with other online stores


Turbo Shear Drill - TOP 10 Results for Price Compare - Turbo Shear Drill Information for April 21, 2019.

  • Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment for 3/8-Inch Drills (Turbo Shear Drill) BUY NOW

    Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment for 3/8-Inch

    $44.95

  • Color: Multicolor
  • Brand: Malco
  • ASIN: B0000AQK7C
  • UPC: 686046530208
  • Malco TSCM Corrugated Metal Turbo Shear (Turbo Drill Shear) BUY NOW

    Malco TSCM Corrugated Metal Turbo

    $97.75

    The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. The TSCM makes fast cross-cuts, lengthwise trim cuts, and circular or square outlet holes, in large or small corrugated patterns and other non-standing-seam panels including trapezoidal (box) profiles. Elongated offset blades with compact jaws allow the drill handle or battery pack to clear the roofing panel surface as the TSCM head follows the rising angle of corrugations and other angled profiles. A sleek, lightweight aluminum-cast shear head and compact molded polymer drill clamp allows maximum portability and ease to go wherever the work is. The shear can operate at high or low speeds for the control you need to follow a precise cut line. Hardened carbon steel blades combine to offer long service life in 30 to 24-gauge (0.31 - 0.61 mm) roofing panel metal. A lateral blade adjustment capability ensures that optimum cutting performance and maneuverability can be maintained for the life of the blades. Replacement blades TSCMRB

  • Color: N/A
  • Brand: Malco
  • ASIN: B00IMJDNKK
  • UPC: 686046542317
  • Malco TSDC Drill Clamp Assembly for All Turbo Shear Attachments (Drill Shear Turbo) BUY NOW

    Malco TSDC Drill Clamp Assembly for All Turbo Shear

    $21.99

    The drill clamp fits most 1200 rpm or larger cordless or a/c drills to make cutting with the turboshear model Ts1 a one-handed operation. Made of strong but lightweight aluminum, the rails of the TSDC drill clamp are easily attached to the Ts1 and positioned and tightened over the body of a drill. The tsce drill clamp and Ts1 turboshear combination can be repositioned upside down as required for even greater maneuverability when cutting across a large expanse of material or through mild profiles

  • Color: NA
  • Brand: Malco
  • ASIN: B0002894I4
  • UPC: 686046530550
  • Malco TSHD Turboshear Heavy-Duty (Shear Drill Turbo) BUY NOW

    Malco TSHD Turboshear

    $74.09

    The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. The TSHD navigates tight patterns and square cuts while cutting a variety of building materials. The TSHD cuts straight and to the left all while making fast cuts in material thickness up to 18-gauge galvanized steel. Cutting applications include ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, ductwork, and even the thick metal of furnace jackets, equipment enclosures or automotive body panels. Replacement blade TSHDRB.

  • Color: Multi
  • Brand: Malco
  • ASIN: B0002894R0
  • UPC: 796084322311
  • Malco TSMD Double-Cut TurboShear Drill Attachment (Shear Drill Turbo) BUY NOW

    Malco TSMD Double-Cut TurboShear Drill

    $106.99

    Make your drill a double-cut metal shear. Now you can get double-cut performance in a Versatile Malco TurboShear. The versatile model TSMD TurboShear Drill Attachment fits a corded or cordless drill you already own. A compact telescoping clamp accommodates both length and width of any size motor housing, including smaller impact drivers, to ensure easy one-hand operation. Optional spacers are stored on clamp for large motor housings. The clamp collar allows the shear head to be rotated 360Degree and set in any position for optimum tool clearance. The blades of Malco Double-Cut TurboShears remove a narrow spiral scrap from the tool path to produce a clean, straight edge on both sides of the cut. These blades can approach a cut from either end to produce a quality work-piece edge. They can also navigate up to 90Degree outside profiles of metal roofing panels, or metal ductwork, and are beefy enough to cut through seams! And you can easily disengage Malco Double-Cut Blades from the cutting path or quickly re-engaged to continue cutting. The long lasting carbon steel blades are also easily replaced on the job.

  • Brand: Malco
  • ASIN: B016S1HRJQ
  • UPC: 686046546636
  • Malco TSF2 TurboShear Fiber Cement Backer Board Shear (Drill Turbo Shear) BUY NOW

    Malco TSF2 TurboShear Fiber Cement Backer Board

    $138.32

    The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. The TSF2 makes cuts in 1/2" (13 mm) backer board and will also cut 5/16” fiber cement siding. Use this to make straight minimum dust cuts and arcs with the capability to navigate curves for window and door arcs! The blades are made of treated high carbon steel and feature a reversible skid plate to assure long service life. Replacement blade and skid plate TSF2RB

  • Color: NA
  • Brand: Malco
  • ASIN: B0014E9WN2
  • UPC: 686046530956
  • Malco TSHD1 Automotive Heavy Duty 18 Gauge Turbo Shear Drill Attachment (Shear Turbo Drill) BUY NOW

    Malco TSHD1 Automotive Heavy Duty 18 Gauge Turbo Shear Drill

    $80.92

    The Turbo shear Model TSHD1 attaches to a minimum 14.4-Volt cordless or maximum 7-Amp A/C electric drill. The driveshaft of the TSHD1 inserts directly into a 3/8-in (10 mm) or 1/2-in (12.7 mm) chuck. The cam end of the driveshaft operates an upper blade to create a smooth scissors cutting action in most common sheet metals. A telescoping drill clamp adjusts to fit length and width of any drill housing for one-hand operation. The compact, molded clamp even fits smaller lithium-ion battery powered drills. Heavy-duty gearing combines with high carbon steel blades to cut up to 18-ga (1.22 mm) automotive steel. Minimal force is required to move through a cut. The Turbo Shear Model TSHD1A1 can follow a straight line or tight left curved or square patterns. A wide jaw opening navigates cuts in auto body panels and profiles including layered metal, rocker panels and plastic bumpers. The sleek, lightweight, aluminum cast shear head and form-fitting drill clamp ensure balanced, easy control. Lateral blade adjustment capability ensures that optimum cutting performance and maneuverability can be maintained for the life of the blades. Service life of the blades is rated at 2500-ft (762 mm) minimum in 24-ga (0.61 mm) mild steel. The long-wearing blades are replaceable and easily installed on t...

  • Brand: Malco
  • ASIN: B004AHC19M
  • UPC: 686046536699
  • Turbo Shear, Left Cut, 18 Ga Mild Steel (Turbo Drill Shear) BUY NOW

    Turbo Shear, Left Cut, 18 Ga Mild

    $69.85

    ' Turbo Shear, Straight, Left Cutting Action, Curve Type Tight Patterns, Right Angles, Metal Gauge 18 Mild Steel 20 Galvanized 22 Stainless Steel, Steel, Installs In Chuck Of 1200 RPM Or Larger Drill Including Tight Patterns And Square Cuts '

  • Color: Silver
  • Brand: Malco
  • ASIN: B005JZMDLK
  • Malco TSV1 Vinyl Scissors Turbo Shear (Shear Turbo Drill) BUY NOW

    Malco TSV1 Vinyl Scissors Turbo

    $156.50

    The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. Use the power assistance of your drill to make fast straight cuts, left circles and squares in popular vinyl siding styles. A knife-like beveled blade edge and easy scissor action quickly penetrates vinyl siding to start cut. Non-slip bite and 3/8 inch (9.53 mm) jaw opening tackles the lock-seam edge of siding with ease. And the wide opening jaws combined with a 3/4 inch (19.05 mm) cutting length make easy work of cutting through profiles. Malco Vinyl-Cutting TurboShears operate at high or low speeds for the control you need to follow a precise cut line. The sleek, lightweight aluminum-cast shear head and compact molded polymer drill clamp of this drill attachment allows maximum portability and ease to go wherever the work is. A lateral blade gap adjustment capability ensures that optimum cutting performance and maneuverability is maintained for the life of the blades. Heavy-duty drive components and hardened carbon steel blades offer lon...

  • Brand: Malco
  • ASIN: B00LW2T3U8
  • UPC: 686046544052
  • Malco TSNS1 Slate Cutting Turbo Shear (Turbo Shear Drill) BUY NOW

    Malco TSNS1 Slate Cutting Turbo

    $189.99

    The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. Make your power drill a powerful slate-cutting shear! This tool is ideal for making fast straight angled or curved cuts in 4mm to 8mm natural roofing slate. Cutting the slate with finished side up produces an authentic-looking, hand-cut appearance. The padded skid plate prevents scratches to the exposed slate finish. Smooth, easy one-hand operation always leaves a free hand to steady the work when making cuts on a bench or rooftop. Cut thousands of linear feet of roofing slate quickly and easily all season long! Replacement blades TSNS1RB

  • Color: Aluminum, with steel blades
  • Brand: Malco
  • ASIN: B0052GQ6WI
  • UPC: 686046538907