Track Assembly

Browse For Track Assembly at Shoplionly | Price Comparison For Track Assembly: newest deals, sales, ratings, and shopping information

Track Assembly - TOP Deals

Browse Track Assembly shopping results from Amazon & compare with other online stores


Track Assembly - TOP 10 Results for Price Compare - Track Assembly Information for October 15, 2018.

  • CRL Tan EZY-Glide Plastic Track Assembly - 6 ft Long (Track Assembly) BUY NOW

    CRL Tan EZY-Glide Plastic Track Assembly - 6 ft

    $18.97

    These high impact, extruded polystyrene plastic track units facilitate a smooth sliding action of lightweight doors and panels. It is recommended to secure track to frame with brads or panel adhesive. Packaged assembly is furnished complete with one top and one bottom section. Use with lightweight glass doors only.

  • Brand: CRL
  • ASIN: B002DVPV1M
  • UPC: 060829892958
  • C.R. LAURENCE D2203BN48 CRL Brushed Nickel 48 BUY NOW

    C.R. LAURENCE D2203BN48 CRL Brushed Nickel 48" Packaged Track Assembly D603 Upper and D602 Lower Track With Nylon

    $52.58

    These Track Assemblies are smooth operating, and will provide years of reliable service. CRL's Low Profile Track Assembly , available in three popular pre-cut lengths, is the most efficient way to purchase a track system for your pass-thru since it minimizes waste of materials. All the Track Assembly components you require are packed in a convenient shipping tube. They are easy-to-install. The two pieces of H-Bar for the bypassing doors have a 1-1/2' (38.1 mm) overlap. CRL Cat. No. D332 End Caps for the H-Bar can be purchased separately. For dry glazing with 1/4' (6 mm) glass use Cat. No. GC728C Vinyl sold separately). To provide security, refer to the large selection of CRL Ratchet and Plunger Type Locks are available. NOTE: Maximum suggested panel size is 36' W x 48' H (914 x 1219 mm). General Glass Cutting: Guidelines Glass Height = Opening Height Minus 1-1/8' (28.6 mm). Important Notes If you need a very tight fit, you should figure your own dimensions. The dimensions shown below are just guideline dimensions that are satisfactory to most installers.D2203 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-1/8'D2204 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-1/8'D2300 Series = Rolling Track Assembly : Glass Height = Opening Minus 1-3/8'D2301...

  • Brand: CR Laurence
  • ASIN: B01NAWXSRK
  • UPC: 732454619834
  • CRL Satin Anodized Deluxe Showcase Sliding Track Assembly D603 Upper & D601 Rail with Nylon Wheels - 12 ft Long (Assembly Track) BUY NOW

    CRL Satin Anodized Deluxe Showcase Sliding Track Assembly D603 Upper & D601 Rail with Nylon Wheels - 12 ft

    $132.51

    This CRL Deluxe Rolling Track Assembly has an aluminum upper channel with an aluminum shoe. The rails drop into the double lower channel. The nylon rollers allow up to 1/4 inch (6 millimeter) glass doors to have effortless sliding. This assembly can be used for residential and commercial installations. NOTE: General Glass Cutting Dimensions Guidelines Glass Height = Opening Minus 1-3/8 inches (35 millimeters) If an extremely tight fit is required, the customer should calculate glass deductions while fabricating the unit, but the guidelines as stated above are satisfactory to most of our customers. CRL Standard Rolling Track Assembly Consists of: =D603">D603 Upper Channel =D610">D610 Shoe =D650">D650 Rollers =D601">D601 Rail =D603">D603 Lower Channel Note: Maximum suggested panel size is 36 inches wide x 48 inches high (914 x 1219 millimeters).

  • Brand: CRL
  • ASIN: B000WO14NQ
  • UPC: 060829394872
  • CRL Brushed Nickel 72 BUY NOW

    CRL Brushed Nickel 72" Packaged Track Assembly D603 Upper and D602 Lower Track With Nylon

    $63.17

    Easy to Inventory Packed Individually In a Tube for Easy Shipping CRL Packaged Rolling Track Assemblies feature a single bottom rail and are pre-packaged in tubes and come in four popular lengths. Assemblies are satin anodized or brushed nickel for a corrosion-free finish. The nylon rollers and plastic guides provide easy rolling and quiet performance. Color: Brushed Nickel Extrusion Length: 72 in (1828 mm) NOTE: General Glass Cutting Dimensions Guidelines Glass Height = Opening Minus 1-1/8 inches (28 millimeters) CRL Rolling Track Assembly Consists of:r> D603 Upper Channel D652 Guides D610 Shoe D650 Rollers D602 Rail Note: Maximum suggested panel size is 36 inches wide x 48 inches high (914 x 1219 millimeters).

  • Brand: C.R. Laurence
  • ASIN: B001TAI4RG
  • Slide Gate Truck Assembly Internal Track Assembly Slide Gate Trolley Wheel (Track Assembly) BUY NOW

    Slide Gate Truck Assembly Internal Track Assembly Slide Gate Trolley

    $59.95

    Slide Gate Truck Assembly Internal Track Assembly Slide Gate Trolley Wheel Factory Lubricated and Sealed Roller Bearings Provides Maintenance Free Operation For The Life Of The Truck Assembly (9 Ball Type Bearings [email protected]). One Piece Stainless Steel Body Truck Assembly, Completely Enclosed In Track Assures Easy, Smooth Sliding Performance. Regular Steel Bearings and High Density Nylon Guide Wheels Provide Free Lateral Movement Control From Inside The Track. Fits 2 1/8" X 2 1/8" ID Track. Internal track slide gate systems have become increasingly popular for use with chain link and ornamental slide gates. The basic top track system consist of a heavy duty aluminum track which is either bolted or welded near the top of the gate frame. Slide gate trucks/ trolleys are then bolted to truck hanger brackets which are then bolted to the two posts. Two lower guide roller assemblies are mounted to the bottom of two gate posts to keep the bottom of the gate in place. Due to the internal track design of the slide gate, pinch points are nearly eliminated completely and moving parts are kept out of the weather. Internal slide gate systems are some of, if not, the smoothest of slide gate hardware systems available. The use of aluminum slide gate track and stainless steel truck/ trolley as...

  • Brand: FenceSmart4U
  • ASIN: B01EB3YVHO
  • UPC: 603404091577
  • Slide Gate Truck Assembly Internal Track Assembly Slide Gate Trolley Wheel (Track Assembly) BUY NOW

    Slide Gate Truck Assembly Internal Track Assembly Slide Gate Trolley

    $54.90

    Slide Gate Truck Assembly Internal Track Assembly Slide Gate Trolley Wheel Factory Lubricated and Sealed Roller Bearings Provides Maintenance Free Operation For The Life Of The Truck Assembly (9 Ball Type Bearings [email protected]). One Piece Stainless Steel Body Truck Assembly, Completely Enclosed In Track Assures Easy, Smooth Sliding Performance. Regular Steel Bearings and Stainless Steel Guide Wheels Provide Free Lateral Movement Control From Inside The Track. Fits 2 1/8" X 2 1/8" ID Track. Internal track slide gate systems have become increasingly popular for use with chain link and ornamental slide gates. The basic top track system consist of a heavy duty aluminum track which is either bolted or welded near the top of the gate frame. Slide gate trucks/ trolleys are then bolted to truck hanger brackets which are then bolted to the two posts. Two lower guide roller assemblies are mounted to the bottom of two gate posts to keep the bottom of the gate in place. Due to the internal track design of the slide gate, pinch points are nearly eliminated completely and moving parts are kept out of the weather. Internal slide gate systems are some of, if not, the smoothest of slide gate hardware systems available. The use of aluminum slide gate track and stainless steel truck/ trolley assem...

  • Brand: FenceSmart4U
  • ASIN: B074FCGZGC
  • UPC: 615284177050
  • Slide-Co 162804 Sliding Track & Pocket Door Kit, 72 in. Extruded Aluminum Track, Rollers, Bumpers & Guides (Assembly Track) BUY NOW

    Slide-Co 162804 Sliding Track & Pocket Door Kit, 72 in. Extruded Aluminum Track, Rollers, Bumpers &

    $30.52

    This sliding door track kit is constructed of the following materials; extruded aluminum 72 in. jump-resistant track, white plastic adjustable guides and concave edge wheels, white rubber bumper, steel brackets and steel ball bearings. The 2 roller assemblies included with this kit feature four 7/8 in. outside diameter wheels per assembly and together will support doors weighing up to 30 pounds each. This roller assembly can be used with both by-pass and pocket door systems. This type of track kit is used by many manufacturers. All fasteners necessary for the installation of this kit are included in packaging.

  • Color: Multi
  • Brand: Slide-Co
  • ASIN: B0044FWZEQ
  • UPC: 733353388975
  • CRL Continental Style 36 BUY NOW

    CRL Continental Style 36" Pre-Cut Security Showcase Sliding Track

    $65.00

    Designed for 3/16" and 1/4" (5 and 6 mm) Glass Satin Anodized Finish CRL Continental Style Security Track System is now available in pre-cut, ready to install assemblies that contain all the parts you will need to complete your showcase project. The Continental Track Assembly has a uniquely designed Anti-Lift Clip that prevents removal of the showcase doors when they are in the locked position. This Track Assembly is well designed, efficient, and attractive. These 36, 48, and 72 inch (914, 1219, and 1829 millimeter) satin anodized assemblies not only save fabrication labor, but also are more economical due to minimized material waste. CRL End Caps for H-Bar, Cat. No. DV148CH, can be ordered separately. Color: Satin Anodized Length: 36 in. (914 mm) Minimum Order: 1 Each General Glass Cutting Guidelines: Glass Height = Opening Height Minus 1-1/8" (28.6 mm) Important Note: NOTE: Maximum suggested panel size is 36" W x 48" H (914 x 1219 mm).

  • Brand: C.R. Laurence
  • ASIN: B00QL5B318
  • UPC: 060829815629
  • CRL Nylon Wheel Assembly for Competitive H-Bar (Track Assembly) BUY NOW

    CRL Nylon Wheel Assembly for Competitive

    $1.90

    Quiet and Economical CRL Competitive Type Nylon Wheel Assembly has a nylon roller with a stainless steel housing and is used with D5610 Series H-Bar along with some other competitors "H" bar on the market. For sliding glass panels fabricated with up to five square feet of 1/4 inch (6 millimeter) plate glass, lucite or other glazing material. Wheel Diameter: 9/16 in (14 mm) Wheel Width: 3/16 in (5 mm) Housing Width: 1/4 in (6 mm) Minimum Order: 1 Each

  • Brand: C.R. Laurence
  • ASIN: B000WO2GZQ
  • UPC: 060829858589
  • 60 in. Sliding Tub Door Track Assembly Kit in Nickel (Assembly Track) BUY NOW

    60 in. Sliding Tub Door Track Assembly Kit in

    $125.00

    Delta Shower Doors: Create your own unique shower door to fit your personal style in 3 easy steps. Choose your Handle or Knob. With these beautiful shower doors you can create your own custom look in 3 easy steps. Choose your glass. Choose your track assembly kit and select your choice of a matching handle or knob. 5 year limited warranty.

  • Color: Nickel
  • Brand: Delta
  • ASIN: B00KYGDV3S
  • UPC: 885785644942