Toggler Anchor

Browse For Toggler Anchor at Shoplionly | Price Comparison For Toggler Anchor: newest deals, sales, ratings, and shopping information

Toggler Anchor - TOP Deals

Browse Toggler Anchor shopping results from Amazon & compare with other online stores


Toggler Anchor - TOP 10 Results for Price Compare - Toggler Anchor Information for December 10, 2018.

  • 12 Pieces TOGGLER SNAPTOGGLE Drywall Anchor with included bolts for 1/4-20 Fastener size; holds 80 pounds each by TOGGLER (Anchor Toggler) BUY NOW

    12 Pieces TOGGLER SNAPTOGGLE Drywall Anchor with included bolts for 1/4-20 Fastener size; holds 80 pounds each by

    $12.99

    Mount anything! The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 1/4"-20 UNC bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 1/4"-20 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors. The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the in...

  • Brand: TOGGLER
  • ASIN: B01IU6HG48
  • UPC: 757901773341
  • TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8 BUY NOW

    TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of

    $9.95

    The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 3/16"-24 UNC-threaded bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 3/16"-24 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included ...

  • Color: Clear
  • Brand: TOGGLER
  • ASIN: B0051IBBUE
  • UPC: 036296433116
  • TOGGLER Toggle TB Residential Drywall Anchor, Polypropylene, Made in US, 3/8 BUY NOW

    TOGGLER Toggle TB Residential Drywall Anchor, Polypropylene, Made in US, 3/8" to 1/2" Grip Range, For #6 to #14 Fastener Sizes (Pack of

    $20.14

    The TOGGLER Toggle TB residential drywall anchor provides a firm hold in 3/8"- to 1/2"-thick drywall, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Before a #6 to #14 size screw with a minimum thread length of 1-1/4" can be inserted to create a secure hold, the included key is used to open the anchor's wings behind the material. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted, and the anchor will stay in place if the fastener is removed, facilitating fixture and screw changes. The Toggle TB anchor meets Federal Specification FF-B-588-D for Type IV anchors.SpecificationsUltimate Tensile Strength ValuesAnchorDrill DiameterScrew Description1/4" Plywood1/2" Plywood3/8" Drywall1/2" Drywall5/8" DrywallTA5/16"#8 x 1-1/4"124 lb.Not applicableNot applicableNot applicableNot applicableTB5/16"#8 x 1-1/2"Not applicable175 lb.97 lb.143 lb.Not applicableTC5/16"#8 x 1-3/4"Not applicableNot applicableNot applicableNot applicable159 lb.Ultimate Shear Strength ValuesAnchorDrill DiameterScrew Description1/4" Plyw...

  • Brand: TOGGLER
  • ASIN: B0051IAZW4
  • UPC: 036296110109
  • TOGGLER Toggle TB Residential Drywall Anchor with Screws, Polypropylene, Made in US, 3/8 BUY NOW

    TOGGLER Toggle TB Residential Drywall Anchor with Screws, Polypropylene, Made in US, 3/8" to 1/2" Grip Range, For #6 to #14 Fastener Sizes (Pack of

    $3.77

    The TOGGLER Toggle TB residential drywall anchor provides a firm hold in 3/8"- to 1/2"-thick drywall, includes #8 x 1-1/2" screws, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Before the screw can be inserted into the anchor to create a secure hold, the included key is used to open the anchor's wings behind the material. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted, and the anchor will stay in place if the fastener is removed, facilitating fixture and screw changes. If using screws other than those supplied, the anchor accepts #6 to #14 size screws with a minimum thread length of 1-1/4". The Toggle TB anchor meets Federal Specification FF-B-588-D for Type IV anchors.SpecificationsUltimate Tensile Strength ValuesAnchorDrill DiameterScrew Description1/4" Plywood1/2" Plywood3/8" Drywall1/2" Drywall5/8" DrywallTA5/16"#8 x 1-1/4"124 lb.Not applicableNot applicableNot applicableNot applicableTB5/16"#8 x 1-1/2"Not applicable175 lb.97 lb.143 lb.Not applicableTC5/16"#8 x 1-3/4"Not applicableNot appl...

  • Color: Original Version
  • Brand: TOGGLER
  • ASIN: B0051IB9JC
  • UPC: 036296452209
  • TOGGLER ALLIGATOR AF6 Flanged Anchor, Polypropylene, Made in US, For #6 to #12 Fastener Sizes (Pack of 100) (Anchor Toggler) BUY NOW

    TOGGLER ALLIGATOR AF6 Flanged Anchor, Polypropylene, Made in US, For #6 to #12 Fastener Sizes (Pack of

    $14.98

    The TOGGLER ALLIGATOR AF6 flanged anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, and is made in USA. Once inserted into a 1/4" drilled hole in a wall, ceiling, or floor, the anchor accepts a #6 to #12 size screw with a thread length at least equal to the thickness of the item being fastened plus 1-3/8". The anchor head is flanged for additional stability compared to a flush-mount head when installing into hollow material and has fins that grip the mounting material to prevent spinning when a screw is inserted. When installed within a solid material, the corrosion-resistant polypropylene body expands and elongates to fill and mold to the hole. This helps distribute the force evenly throughout its length to help prevent wall fracture. When installed within a hollow material or a solid material with unexpected cavities, the anchor's jaws open as a screw is inserted, locking the anchor and screw within the material.SpecificationsUltimate Tensile Strength ValuesAnchorDrill DiameterScrew Description1/2" Drywall3,500 psi ConcreteA5/AF53/16"#8 sheet metal screw57 lb.544 lb.A6/AF61/4"#10 sheet metal screw69 lb.675 lb.A8/AF85/16"#12 sheet metal screw85 lb.1,025 lb.A103/8"#14 sheet metal screwN/A1,168 lb.Ultimate Shear Strength ValuesAnchorDrill Diame...

  • Brand: TOGGLER
  • ASIN: B0051IAWM2
  • UPC: 036296131012
  • TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8 BUY NOW

    TOGGLER Toggle TA Hollow-Door Anchor with Screws, Polypropylene, Made in US, 1/8" to 1/4" Grip Range, For #8 to #12 Fastener Sizes (Pack of

    $8.50

    The TOGGLER Toggle TA hollow-door anchor provides a firm hold in 1/8"- to 1/4"-thick hollow-core doors and thin panels, includes #8 x 1-1/4" screws, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Before the screw can be inserted into the anchor to create a secure hold, the included key is used to open the anchor's wings behind the material. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted, and the anchor will stay in place if the fastener is removed, facilitating fixture and screw changes. If using screws other than those supplied, the anchor accepts #8 to #12 size screws with a minimum thread length of 1". The Toggle TA anchor meets Federal Specification FF-B-588-D for Type IV anchors.SpecificationsUltimate Tensile Strength ValuesAnchorDrill DiameterScrew Description1/4" Plywood1/2" Plywood3/8" Drywall1/2" Drywall5/8" DrywallTA5/16"#8 x 1-1/4"124 lb.Not applicableNot applicableNot applicableNot applicableTB5/16"#8 x 1-1/2"Not applicable175 lb.97 lb.143 lb.Not applicableTC5/16"#8 x 1-3/4"Not appl...

  • Brand: TOGGLER
  • ASIN: B0051IB8R0
  • UPC: 036296502751
  • TOGGLER Toggle TB Residential Drywall Anchor with Screws, Polypropylene, Made in US, 3/8 BUY NOW

    TOGGLER Toggle TB Residential Drywall Anchor with Screws, Polypropylene, Made in US, 3/8" to 1/2" Grip Range, For #6 to #14 Fastener Sizes (Pack of

    $0.21

    The TOGGLER Toggle TB residential drywall anchor provides a firm hold in 3/8"- to 1/2"-thick drywall, includes #8 x 1-1/2" screws, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Before the screw can be inserted into the anchor to create a secure hold, the included key is used to open the anchor's wings behind the material. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted, and the anchor will stay in place if the fastener is removed, facilitating fixture and screw changes. If using screws other than those supplied, the anchor accepts #6 to #14 size screws with a minimum thread length of 1-1/4". The Toggle TB anchor meets Federal Specification FF-B-588-D for Type IV anchors.SpecificationsUltimate Tensile Strength ValuesAnchorDrill DiameterScrew Description1/4" Plywood1/2" Plywood3/8" Drywall1/2" Drywall5/8" DrywallTA5/16"#8 x 1-1/4"124 lb.Not applicableNot applicableNot applicableNot applicableTB5/16"#8 x 1-1/2"Not applicable175 lb.97 lb.143 lb.Not applicableTC5/16"#8 x 1-3/4"Not applicableNot appl...

  • Color: Clear
  • Brand: TOGGLER
  • ASIN: B0051IB94C
  • UPC: 036296503000
  • TOGGLER SNAPTOGGLE BB Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8 BUY NOW

    TOGGLER SNAPTOGGLE BB Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 1/4"-20 UNC Fastener Size (Pack of

    $6.28

    The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 1/4"-20 UNC bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 1/4"-20 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts throu...

  • Color: Clear
  • Brand: TOGGLER
  • ASIN: B0051IBDKW
  • UPC: 036296504250
  • TOGGLER TBS2 Pegboard Anchor with Screws, Made in US, 3/8 BUY NOW

    TOGGLER TBS2 Pegboard Anchor with Screws, Made in US, 3/8" to 1/2" Grip Range, For #8 x 1-3/4" Fastener Size (Pack of

    $1.95

    The TOGGLER Toggle TBS2 pegboard anchor spaces a pegboard away from a wall while providing a firm hold in most solid and hollow materials, includes #8 x 1-3/4" screws, and is made in USA. The built-in spacer eliminates the need for furring strips to achieve the keeps the pegboard mounted with proper clearance for hooks, increases the amount of usable pegboard space, and expands the positioning options. The corrosion-resistant polypropylene body installs into a 5/16" drilled hole with a hammer and the included fasteners. When used in solid material, the anchor's jaws expand to grip the sides of the drilled hole. When the anchor is installed in hollow material between 3/8" and 1/2" thick, the anchor's jaws open behind the mounting material using the included key to lock the anchor in place. If using screws other than those supplied, the anchor accepts a #8 x 1-3/4" pan head screw with washer (or any screw with a head larger than the peghole).Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, inc...

  • Color: Clear
  • Brand: TOGGLER
  • ASIN: B0051IB7IU
  • UPC: 036296502003
  • TOGGLER ALLIGATOR AF6 Flanged Anchor with Screws, Polypropylene, Made in US, For #6 to #12 Fastener Sizes (Pack of 20) (Toggler Anchor) BUY NOW

    TOGGLER ALLIGATOR AF6 Flanged Anchor with Screws, Polypropylene, Made in US, For #6 to #12 Fastener Sizes (Pack of

    $3.72

    The TOGGLER ALLIGATOR AF6 flanged anchor provides a secure hold in solid and hollow concrete, brick, stone, and drywall, includes #10 x 1-1/2" sheet metal screws for fastening, and is made in USA. Once inserted into a 1/4" drilled hole in a wall, ceiling, or floor, the anchor accepts an included screw. The anchor head is flanged for additional stability compared to a flush-mount head when installing into hollow material and has fins that grip the mounting material to prevent spinning when a screw is inserted. When installed within a solid material, the corrosion-resistant polypropylene body expands and elongates to fill and mold to the hole. This helps distribute the force evenly throughout its length to help prevent wall fracture. When installed within a hollow material or a solid material with unexpected cavities, the anchor's jaws open as a screw is inserted, locking the anchor and screw within the material. If using screws other than those supplied, the anchor accepts a #6 to #12 size screw with a thread length at least equal to the thickness of the item being fastened plus 1-3/8".SpecificationsUltimate Tensile Strength ValuesAnchorDrill DiameterScrew Description1/2" Drywall3,500 psi ConcreteA5/AF53/16"#8 sheet metal screw57 lb.544 lb.A6/AF61/4"#10 sheet metal screw69 lb.675 ...

  • Brand: TOGGLER
  • ASIN: B0051IBF8M
  • UPC: 036296504755