Rejection Membrane

Browse For Rejection Membrane at Shoplionly | Price Comparison For Rejection Membrane: newest deals, sales, ratings, and shopping information

Rejection Membrane - TOP Deals

Browse Rejection Membrane shopping results from Amazon & compare with other online stores


Rejection Membrane - TOP 10 Results for Price Compare - Rejection Membrane Information for October 15, 2018.

  • Spectrapure 90-GPD 99 Percent Rejection Membrane (Rejection Membrane) BUY NOW

    Spectrapure 90-GPD 99 Percent Rejection

    $64.98

    OVERVIEW: SpectraSelect Plus membranes set the industry standards for highest rejection, flow rate, and longevity. SpectraSelect Plus 99% Rejection Membranes effectively DOUBLES post Deionizing cartridge life! SpectraPure SpectraSelectPlus membranes are treated with a proprietary process to enhance rejection, increase production and speed rinse up times. These treated membranes are then hand-picked and individually tested for consistent ultra-high rejection. No other membrane can match the SpectraSelectPlus for long life and the ability to remove silica phosphates, nitrates, and heavy metals. Can also be used available as an upgrade replacement option for most Reverse Osmosis Systems, and are interchangeable with Captive Purity, Kent Marine, Air Water Ice, Bulk Reef Supply, and most residential/aquarium RO or RO-DI systems. FEATURES: - Typical stabilized conductivity rejection 99%, minimum conductivity rejection 98%. - Membranes produce rated GPD ± 20% at 60 psi. - *Permeate flow and conductivity rejection based on 250 ppm, 77°F (25°C) softened water feed, 15% recovery and the specified applied pressure. Working limits: - Maximum temperature 113F (45c) note: DO NOT FREEZE-DAMAGE MAY OCCUR! - pH range 2-11 - Free chlorine limits less than 0.1ppm - Maximum feed water silt densit...

  • Brand: SpectraPure
  • ASIN: B016MN05IU
  • UPC: 093547400211
  • TW30-1812-100HR Dow Filmtec 100 gpd High Rejection TFC Replacement Membrane for Undersink Reverse Osmosis (RO) System (New Model Replaces TW30-1812-100) (Rejection Membrane) BUY NOW

    TW30-1812-100HR Dow Filmtec 100 gpd High Rejection TFC Replacement Membrane for Undersink Reverse Osmosis (RO) System (New Model Replaces

    $31.50

    TW30-1812-100HR Dow Filmtec High Rejection RO Reverse Osmosis Membrane This membrane is rated at 100 Gallons per Day. If you have chlorinated water, we recommend you use a Carbon/Sediment Pre Filter. The residual chlorine in municipal or city water will destroy the Thin Film Composite (TFC) membrane. Dow Filmtec TW30-1812-100HR Reverse Osmosis Membrane elements are for drinking water. The industry's most reliable advanced membrane technology and automated fabrication, allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers and residential customers can rely on. This membrane fits in standard 1.8"x12" residential RO membrane housings. The industry's most reliable for drinking water is the Filmtec reverse osmosis membrane elements. Advanced membrane technology and automated fabrication in the Filmtec reverse osmosis membrane allow these elements to deliver consistent performance for all customers. Filmtec reverse osmosis membrane TW30-1812-100HR element is NSF/ANSI Standard 58 listed. Filmtec home drinking water elements are rated at 50 psi and will purify about 20% more water than competitive elements rated at 60 psi. Because of environmental factors actual production may vary. Membrane Type: Polyamide Thin-Film Composite (TFC...

  • Color: Blue
  • Brand: Dow Filmtec
  • ASIN: B078K4L8HB
  • Determination of the surface and colloidal conditions which can lead to high salt rejection reverse osmosis polymer membranes (Membrane Rejection) BUY NOW

    Determination of the surface and colloidal conditions which can lead to high salt rejection reverse osmosis polymer

    $16.99

    1969 Office of Saline Water. Research and Development Progress Report No. 466. 4to., 135pp., illustrations, original printed wraps. A few Depository Library stamps. VG.

  • ASIN: B003YH9RAK
  • Axeon HR3 Series Polyamide Thin Film Composite High Rejection Reverse Osmosis Membrane, 2200 gpd Flow Rate, 2 - 11 pH Range (Rejection Membrane) BUY NOW

    Axeon HR3 Series Polyamide Thin Film Composite High Rejection Reverse Osmosis Membrane, 2200 gpd Flow Rate, 2 - 11 pH

    $309.85

    The Axeon high rejection HR3 series membrane elements are very reliable and high performing. These high rejection membranes provide better salt rejection for tap water and light brackish water applications than low energy elements, but require more operating energy. The HR3 series functions at standard 225 psi operating pressure. These membranes offer reliability, high performance and deliver consistent results. They provide increased production, high rejection rates and low energy consumption by operating at low applied pressures. Feature a protective ABS shell. Advanced membrane technology and manufacturing processes ensure high quality and performance. All elements are shipped dry for an indefinite shelf life and easier handling. These membranes elements are 100 percent vacuum integrity tested and may also be ordered as individually wet tested. High rejection rates. Improved system performance. Superior quality and cost savings. Individually vacuum tested. 2200 gpd permeate flow rate. 99.50 percent stabilized salt rejection. 225 psig applied pressure. 113 degree F maximum operating temperature. 600 psi maximum operating pressure. 14 gpm maximum feed flow rate. 2-11 pH Range, continuous operation. 1-13 pH Range - short term cleaning (30 minutes). 5 maximum SDI. Less than 1 maxi...

  • Brand: Axeon
  • ASIN: B005L3YIAY
  • UPC: 789957605598
  • APEC MEM-ES-50 50 GPD Membrane Replacement Filter For Reverse Osmosis System (Membrane Rejection) BUY NOW

    APEC MEM-ES-50 50 GPD Membrane Replacement Filter For Reverse Osmosis

    $39.95

    Apec's 50 gpd essence reverse osmosis membranes are effective filtration elements that have been designed to deliver high contaminant rejection rates at high input tds levels. These industry standard 10 inch membranes use an industry leading state-of-the-art tfc (thin film composite) design to provide high quality water for a broad range of water chemistries. They will fit in most commonly available housings to provide Ultra pure and safe reverse osmosis drinking water. APEC Water Systems does not distribute or sell our products to any 3RD party sellers on Amazon. Please purchase genuine apec water system product in "new" condition from Amazon.Com or apec water directly for authenticity. Manufacture warranty may not apply in all cases, depending on factors such as use of product, where the product was purchased, or whom you purchased the product from. Please review the warranty carefully and contact apec if you have any question.

  • Color: Blue
  • Brand: APEC Water Systems
  • ASIN: B01IIWC55Y
  • UPC: 854961005976
  • APEC High Flow US Made 45 GPD Complete Replacement Filter Set for ULTIMATE Series Reverse Osmosis Water Filter System (For Upgraded System FILTER-MAX45-38) (Membrane Rejection) BUY NOW

    APEC High Flow US Made 45 GPD Complete Replacement Filter Set for ULTIMATE Series Reverse Osmosis Water Filter System (For Upgraded System

    $106.01

    All us made super high capacity filters 1St stage: high-grade 5 micron 10 inch high-capacity polypropylene sediment filter -removes dust, particles, and rust. 100% pure polypropylene depth filter with exceptional dirt-holding capacity translates to longer life and fewer change-outs than existing string-wound or resin-bonded filters. 2Nd and 3RD stage: premium extruded carbon block 5 micron 10 inch -gets rid of unpleasant chlorine, tastes, odors, cloudiness and colors. Also removes VOCs and other common chemicals from the water. Apec's extruded carbon block filters consist of activated carbon particles fused into a uniform block with enhanced adsorptive capacity and efficiency. Unlike granular activated carbon (GAC) filters, these extruded carbon block cartridges will not channel or bypass due to the extreme uniformity of their extruded activated carbon core. 4th stage: select filmtec (dow chemical) high rejection tfc reverse osmosis membrane. Removes up to 99% of TOTAL dissolved solids (tds) and contaminants such as arsenic, lead, fluoride, chromium, radium, bacteria, viruses and much more. 5th stage: advanced coconut shell refining carbon 3/8 inch quick connect - tcr (TOTAL contamination removal) filter removes any possible residual taste from the tank. For over 17 years, apec h...

  • Color: White
  • Brand: APEC Water Systems
  • ASIN: B01JQKGC7E
  • UPC: 851001007228
  • 100 GPD Reverse Osmosis Membrane | Top Quality Replacement for any RO system (Rejection Membrane) BUY NOW

    100 GPD Reverse Osmosis Membrane | Top Quality Replacement for any RO

    $26.66

    Specifications: • Membrane Type: Thin-Film Composite (TFC) • Membrane Material: Polyamide (PA) • Element Configuration: Spiral Wound • Maximum Operating Pressure: 125 psi • Maximum Operating Temperature: 113 Degrees F (45 Degrees C) • Operating pH Range: 3.0 - 10.0 Flow Rates and Production Capacity: All reverse osmosis (RO) membranes are carefully matched to achieve a certain flow-rate of permeate (treated) water consistent with the overall design of the RO system. LiquaGen does not distribute or sell products to any 3rd party sellers on Amazon. This product is sold exclusively on LiquGen's Amazon store. Other companies selling this product are counterfeits. Please make sure to purchase a genuine LiquaGen product for proper authenticity and warranty.

  • Brand: LiquaGen Water
  • ASIN: B01DFEH6CW
  • UPC: 672713465294
  • Active Aqua Reverse Osmosis Membrane, 100 GPD (Rejection Membrane) BUY NOW

    Active Aqua Reverse Osmosis Membrane, 100

    $43.86

    A true thin film composite (TFC) reverse osmosis membrane, made from high quality TFC sheets - tested and proven to be the best material available for membrane applications. Rated for 100 or 150 gallons per day with a stabilized salt rejection of 98.6%. Fits most standard RO membrane housings.

  • Brand: Hydrofarm
  • ASIN: B00CJJ72HE
  • UPC: 638104005531
  • Study of oriented cellulose membranes for osmosis and the relationship between morphology and salt rejection (Rejection Membrane) BUY NOW

    Study of oriented cellulose membranes for osmosis and the relationship between morphology and salt

    $13.99

  • ASIN: B002ZVP9DU
  • Hydronix BW-4040 Hydron High Performance Commercial and Industrial Membrane, 2400 GPD, 40 BUY NOW

    Hydronix BW-4040 Hydron High Performance Commercial and Industrial Membrane, 2400 GPD, 40" x

    $161.00

    Hydron BW-4040 Reverse Osmosis Membrane elements are 2400 gallon per day membranes with 99.0% rejection and a minimum rejection rate of 98.5% designed for commercial use. The BW-4040's advanced membrane technology and automated fabrication, allow these membranes to deliver consistent performance, superb contaminant reduction, and true reliability. Features that equipment suppliers, water treatment dealers and small water plant customers globally can rely on. Fits in standard 4"x 40" commercial RO membrane housings. Replacement for GE Osmosis Desal AG4040FF, GE Osmosis Desal AG4040TF, Dow Filmtec TW30-4040, CSM RE4040-BE and TW30-4040.

  • Brand: Hydronix
  • ASIN: B01CFOGPXY
  • UPC: 693614030008