Pva Mold Release

Browse For Pva Mold Release at Shoplionly | Price Comparison For Pva Mold Release: newest deals, sales, ratings, and shopping information

Pva Mold Release - TOP Deals

Browse Pva Mold Release shopping results from Amazon & compare with other online stores


Pva Mold Release - TOP 10 Results for Price Compare - Pva Mold Release Information for May 19, 2019.

  • PVA Partall #10, Green Liquid Release, 1 Quart (Mold Release Pva) BUY NOW

    PVA Partall #10, Green Liquid Release, 1

    $8.86

    Special Shipping Information: This product may not be available for expedited shipping due to federal regulations that require it to ship via ground ship methods only (Delivery dates may vary from estimate delivery date). This product can only be shipped within the 48 contiguous states. Product ships from Florida. Return Policy: Buyer may return any product to FGCI within ten days from date of receipt. However, this return right only applies if (i) the product has not been used or tampered with and is otherwise suitable for re-sale, and (ii)Buyer obtained prior written authorization from a duly authorized representative of FGCI make a return. (a) Restocking Charge. If the product is returned within the ten day period, then FGCI will give the buyer a credit equal to 75% of the purchase price (i.e. there will be a 25% re-stocking charge). However, this restocking charge only applies to the particular line item returned and not to the entire invoice. (b) Miscellaneous. FGCI will not issue any credit to buyer after the ten day period. Buyer must pay all taxes and other charges related to returned items. Any goods returned by the buyer shall be returned at the buyers sole expense and obligation.

  • Brand: Fiberglass Coatings
  • ASIN: B0193IW9D0
  • Fiberglass Evercoat Mold Release Agent, 8-Ounce (Release Mold Pva) BUY NOW

    Fiberglass Evercoat Mold Release Agent,

    $8.99

    Since 1953, Evercoat has made a promise to bring only the highest quality products to the marine industry. These high quality products to the marine industry. These high quality products make the maintenance and repair of your boat better and easier than ever before. Polyvinyl Alcohol (PVA) is for use as a curing agent for Gel-Kote and other air inhibited polyester resins. Spray a light mist over the catalyzed Gel-Kote to fully cure the Gel-Kote resin and eliminate the tacky feel. Also an excellent mold release agent.

  • Brand: Fiberglass Evercoat
  • ASIN: B00144B4EM
  • UPC: 023289056858
  • PARTALL Film #10 Polyvinyl Alcohol (PVA) Half Pint (Mold Pva Release) BUY NOW

    PARTALL Film #10 Polyvinyl Alcohol (PVA) Half

    $11.99

    Partall® Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive). Partall® Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble. Protects against mold hang ups with polyester and vinylester resins; also used with epoxy and urethane resins. PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.) Partall® Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure). Now improved for easier lay out, Partall® Film #10 allows application by brush, roller, sponge or cloth as well as excellent spray characteristics.

  • Brand: FSD
  • ASIN: B078XGJFDK
  • UPC: 819794021166
  • Smooth-On Universal Mold Release 14 fl. oz. (Mold Pva Release) BUY NOW

    Smooth-On Universal Mold Release 14 fl.

    $13.94

    If you've ever been to the movies, admired a piece of sculpture, marveled at detailed architectural ornamentation or used a telephone; then you've encountered the handiwork of people who use Smooth-On rubbers, plastics, foams and other products to turn their ideas into 3-dimensional reality. Universal Mold Release Agent is formulated especially for mold making and casting, and works well with most liquid rubber and liquid plastic products. It will release mold rubbers (such as polyurethanes and polysulfides) from properly prepared models. Sealing porous models (wood, plaster, concrete) or certain modeling clays (containing water or sulfur) with Smooth-On SuperSeal or other sealer may be necessary. Universal Mold Release is effective over a broad temperature range from 70°F to 500°F. Features If using silicone rubber, seal model surface with SuperSeal only. Do not use Universal Mold Release. Universal Mold Release also easily releases a variety of casting materials (epoxies, Smooth-On liquid plastics, etc.) from cured rubber molds. This product has a limited shelf life and should be used as soon as possible. Properly used, Universal Mold Release improves molding efficiency for a variety of casting applications and will actually lengthen the life of your production mold.

  • Color: Clear
  • Brand: Smooth
  • ASIN: B004BNHLOK
  • UPC: 751635700109
  • Fibre Glast PVA Release Film - Gallon (Mold Release Pva) BUY NOW

    Fibre Glast PVA Release Film -

    $24.75

    PVA, or polyvinyl alcohol, should be used with our #1016 Partall Wax for the easy release of parts from a mold. Wax should be applied to the mold, 3-4 layers thick, and buffed to a high gloss. Once the final layer of wax has dried, PVA should be applied with the following considerations:PVA can be brushed on, but for best results, apply with a spray gun, 12-18 inches away from substrate. Generally, apply in three layers: the first, a thin mist, allowing 10-15 minutes to dry completely. Then apply two heavier flow coats, allowing each to dry completely (30-45 minutes each).PVA should form a smooth, glossy surface that will not shrink or pull away from corners or curved surfaces. It may be applied over polyester repairs, or gel coat, as a surface layer for airless tack-free cure.As a dry film, PVA is resistant to the solvents in a resin system, but is water soluble. PLEASE NOTE: It should not be used with resin or substrate that containsóor producesówater during cure.One gallon covers approximately 400 square feet. PLEASE NOTE: This product can not be shipped to a PO Box, and will need a physical address to ship

  • Brand: Fibre Glast
  • ASIN: B015NM6K0I
  • UPC: 802390004466
  • PVA Partall #10, Green Liquid Release, 1 Gallon (Pva Mold Release) BUY NOW

    PVA Partall #10, Green Liquid Release, 1

    $27.23

    Special Shipping Information: This product may not be available for expedited shipping due to federal regulations that require it to ship via ground ship methods only (Delivery dates may vary from estimated delivery date). This product can only be shipped within the 48 contiguous states. Product ships from Florida. Return Policy: Buyer may return any product to FGCI within ten days from date of receipt. However, this return right only applies if (i) the product has not been used or tampered with and is otherwise suitable for re-sale, and (ii)Buyer obtained prior written authorization from a duly authorized representative of FGCI make a return. (a) Restocking Charge. If the product is returned within the ten day period, then FGCI will give the buyer a credit equal to 75% of the purchase price (i.e. there will be a 25% re-stocking charge). However, this restocking charge only applies to the particular line item returned and not to the entire invoice. (b) Miscellaneous. FGCI will not issue any credit to buyer after the ten day period. Buyer must pay all taxes and other charges related to returned items. Any goods returned by the buyer shall be returned at the buyers sole expense and obligation.

  • Brand: Fiberglass Coatings
  • ASIN: B0193JIP14
  • PARTALL Film #10 Polyvinyl alcohol (PVA) Pint (Pva Mold Release) BUY NOW

    PARTALL Film #10 Polyvinyl alcohol (PVA)

    $13.99

    Partall® Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive). Partall® Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble. Protects against mold hang ups with polyester and vinylester resins; also used with epoxy and urethane resins. PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.) Partall® Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure). Now improved for easier lay out, Partall® Film #10 allows application by brush, roller, sponge or cloth as well as excellent spray characteristics.

  • Brand: FSD
  • ASIN: B078XH3NYR
  • UPC: 819794021159
  • Fibre Glast PVA Release Film - Quart (Mold Pva Release) BUY NOW

    Fibre Glast PVA Release Film -

    $10.75

    PVA, or polyvinyl alcohol, should be used with our #1016 Partall Wax for the easy release of parts from a mold. Wax should be applied to the mold, 3-4 layers thick, and buffed to a high gloss. Once the final layer of wax has dried, PVA should be applied with the following considerations:PVA can be brushed on, but for best results, apply with a spray gun, 12-18 inches away from substrate. Generally, apply in three layers: the first, a thin mist, allowing 10-15 minutes to dry completely. Then apply two heavier flow coats, allowing each to dry completely (30-45 minutes each).PVA should form a smooth, glossy surface that will not shrink or pull away from corners or curved surfaces. It may be applied over polyester repairs, or gel coat, as a surface layer for airless tack-free cure.As a dry film, PVA is resistant to the solvents in a resin system, but is water soluble. PLEASE NOTE: It should not be used with resin or substrate that containsóor producesówater during cure.One gallon covers approximately 400 square feet. PLEASE NOTE: This product can not be shipped to a PO Box, and will need a physical address to ship

  • Brand: Fibre Glast
  • ASIN: B015NM6MDS
  • UPC: 802390004459
  • Fibre Glass-Evercoat Co Gel Kote White Pint (Pva Release Mold) BUY NOW

    Fibre Glass-Evercoat Co Gel Kote White

    $22.26

    Gel-Kote - White - Pint--The highest quality ISO NPG marine gel coat to permanently repair or replace the original, high-gloss finish. Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat. Gel-Kote™ is a non-run, non-sag formulation of rigid, flexible polyester resins to produce resilience and toughness. Evercoat™ Coloring Agents may be used to tint Gel-Kote to any color.

  • Color: White
  • Brand: FIBRE GLASS-EVERCOAT CO
  • ASIN: B00144GNJS
  • UPC: 023289056735
  • PARTALL Film #10 Polyvinyl alcohol (PVA) Half Gallon (Mold Pva Release) BUY NOW

    PARTALL Film #10 Polyvinyl alcohol (PVA) Half

    $33.95

    Partall® Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive). Partall® Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble. Protects against mold hang ups with polyester and vinylester resins; also used with epoxy and urethane resins. PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.) Partall® Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure). Now improved for easier lay out, Partall® Film #10 allows application by brush, roller, sponge or cloth as well as excellent spray characteristics.

  • Brand: FSD
  • ASIN: B078XGHVQY
  • UPC: 819794021135